 |  | 
  
These antennas and extensions will work with either the home or car cradles of the Audiovox XR9, Xpress, Xpress RC, Xpress EZ, and Xpress R.
|
 | Compact XM Radio Home Antenna This Compact XM Home Antenna allows you to to receive XM's signal so you can enjoy XM through your home stereo system. While the antenna does NOT have a magnetic base for mounting, it does come with a folding stand complete with screw holes for a more permanent mounting solution.
Features:
- Waterproof for outdoor use
- 90 Degree antenna connector
- Compact design - Will fit almost everywhere
- Excellent compatibility - Works with most XM Satellite Receivers
- Folding stand with screw holes - Assures you of versatile positioning in your home or office
Compatible with:
Specifications:
- Dimensions: 2.38" W x 3" H x 0.63" D
- Weight: 3.1 oz
- Antenna: 90 degree SMB
- Cable Length: approx 20'
Note: This is the Compact XM home antenna ONLY

|  |  | XM Radio Boombox Home Antenna The Delphi XM Home Antenna allows you to to receive XM's signal so you can enjoy XM through your home stereo system. While the antenna does NOT have a magnetic base for mounting, it does come with a folding stand complete with screw holes for a more permanent mounting solution.
Features:
- Waterproof for outside use
- Excellent compatibility - Works with most XM Satellite Receivers
- Folding stand with screw holes - For permanent mounting
Compatible with:
Specifications:
- Dimensions: 2.75" W x 3.63" H x 1" D
- Weight: .37 lb.
- Antenna: SMB
- Cable Length: approx 20'
Please note: This XM Radio Boombox Home Antenna should not be used with the XMBB1 Portable Sound System. Its straight connector tip will interfere with the sound systems rear cover. The Compact XM Radio Home Antenna should be used with the XMBB1 Portable Sound System.

|  |  | 10-Foot Delphi XM Radio Home Antenna The Delphi XM Home Antenna allows you to to receive XM's signal so you can enjoy XM through your home stereo system. While the antenna does NOT have a magnetic base for mounting, it does com with a folding stand complete with screw holes for a more permanent mounting solution.
Features:
- Waterproof for outside use
- Excellent compatibility - Works with most XM Satellite Receivers
- Folding stand with screw holes - For permanent mounting
Compatible with:
Specifications:
- Dimensions: 2.75" W x 3.63" H x 1" D
- Weight: .37 lb.
- Antenna: SMB
- Cable Length: approx 10'
Note: This is the Delphi XM home antenna ONLY

|  |  | Belkin XM Radio Home Antenna The Belkin XM Home Antenna allows you to to receive XM's signal so you can enjoy XM through your home stereo system. While the antenna does NOT have a magnetic base for mounting, it does come with a folding stand complete with screw holes for a more permanent mounting solution.
Features:
- Waterproof for outside use
- 90 Degree antenna connector
- Compact design - Will fit almost everywhere
- Excellent compatibility - Works with most XM Satellite Receivers
- Folding stand with screw holes - Assures you of versatile positioning in your home or office
Compatible with:
Specifications:
- Dimensions: 2.38" W x 3" H x 0.63" D
- Weight: 3.1 oz
- Antenna: 90 degree SMB
- Cable Length: approx 20'
Note: This is the Belkin XM home antenna ONLY

|  |  | Terk XM6 Home / Commercial Outdoor XM Antenna The TERK XM-6 outdoor antenna is a high performance antenna which can replace the home antenna that comes with many XM Radio home kits and receivers. The XM6 is weather resistant, can withstand years of abuse from the elements, and is designed to maintain better reception for maximum signal strength. The XM6 comes with a universal mounting bracket that can be installed to a wall, roof, or mast (including a satellite dish mast) and uses common RG-6 cable (not included).
Features:
- Weather-proof Outdoor XM Antenna
- Positioning Arm with adjustable swivel mounts allow for best signal reception
- Uses standard RG-6 cabling - Perfect for pre-wired buildings
- Single SMB connector adapter will plug into any XM home radio or boombox
- Hardware included - For installation to a wall, roof, or mast
Kit Includes:
- XM6
- Universal mounting bracket
- Threaded F-type SMB adapter
- Weather Boot
- Four 1 inch self-tapping screws
- 2 universal mounting bracket
- 2 U-bolts, 4 nuts
- 4 #10 screws
- Installation Manual
Compatible with:
Specifications:
- Antenna Dimensions: 2.99" W x 1.43" H x 3.54" D
- Mounting Base Dimensions: 3.34" W x 4.73" H x 2.08" D
- Weight: 1 lb
- Frequency: 2332.5-2345 MHz
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization: LHCP (Circular)
- Gain: 30 dB, typical
- Noise Figure: 1 dB, typical
- Current Drain: 70 mA, max
- Arm Extension: 3.85" - 11.83"
Installation of the XM-6 antenna will additionally require RG-6 cable. It is available in
50-foot and 100-foot lengths. It is recommended to use an In-Line Amplifier for cable runs of 75 feet or more.

|  |  | Thru-Glass Single Lead Cable XM Antenna The Think Wireless thru-glass antenna is the first available single lead thru-glass XM antenna. With this antenna you will no longer need to run your antenna cable to the outside of your vehicle. Simply run the interior portion of the antenna from your satellite radio to a window and then adhere the exterior unit to the outside glass and you are ready to go! Signal is transmitted through your vehicles glass making installation a breeze.
Features:
- Quick and easy installation
- No wires to run outside your vehicle
- Adhesive will not damage vehicle
- XM approved
- Single cable design
- Self powered
Includes:
- Exterior unit
- Interior unit with cable
- Alignment template
- Glass curvature test template
- Alcohol pads (2)
- Instruction Manual
Please Note: If you are concerned with installation location and performance, prior to using the antenna's adhesive, you may temporarily adhere the antenna with masking tape over the top of it to test it in your selected mounting location. Do not drive your vehicle unless you have installed the antenna as per the manufacturer's instructions. Once the adhesive is exposed and used, the antenna may not be returned for a refund. Exchange only if defective once the adhesive has been exposed and used.

|  |  | Interior Glass Mount XM Radio Antenna The Interior Glass Mount Antenna allows you to mount your XM Radio antenna inside your vehicle on the windshield or rear window. Its adhesive pad securely mounts to the glass and makes installation a breeze. Eliminating the need to mount an unsightly antenna on your vehicles roof or fuss with running wires outside of your vehicle. The perfect option for convertible vehicles and jeeps. The antenna features both a pink FAKRA connector and a SMB adapter making it compatible with almost all XM Satellite radios. Its 10 foot heavy duty cable allows you to easily reach the front or rear of your vehicle and its thin size makes the cable easy to hide.
- Eliminates the need for external roof mounted antenna
- Quick and easy adhesive glass mount installation
- No wires to run outside of your vehicle
- Excellent compatibility - works with most XM Satellite receivers
Compatible radios using the SMB connector:
Compatible radios using the Pink FAKRA connector:
- Skyfi (Pink FAKRA connector car cradle only)
- Skyfi2 (Pink FAKRA connector car cradle only)
- XMD1000
- XM Commander
For the best performance this antenna must be installed on a window area with a minimum angle of 45 degrees. The antenna is not waterproof and should not be installed on the exterior of your vehicle. Do not install the antenna over any electric window defroster lines.

|  |  | Ultra-Micro XM Car Antenna The Ultra-Micro XM Car Antenna is the smallest XM Radio antenna in the world. Approximately the size of a quarter, it discreetly installs on any vehicle making it practically invisible. Magnetic mounting with rubber feet allows for quick installation without drilling into your vehicle's metal surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Approximately the size of a quarter
- Magnet mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1" W x 1.1" D x 0.5" H
- Weight: 2.9 oz
- Antenna: 90 degree SMB
- Cable Length: approx 20'

|  |  | 20-Foot XM Radio Micro Car Antenna The 20' XM Micro Antenna is one of the smallest XM Radio antennas available. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's the one of the smallest XM antenna ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz
- Antenna: 90 degree SMB
- Cable Length: approx 20'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the 20' XM Micro Antenna ONLY

|  |  | 20-Foot XM Radio Micro Car Antenna (Factory Reconditioned) The Factory Reconditioned 20' XM Micro Antenna is one of the smallest XM Radio antennas available. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's the one of the smallest XM antenna ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz
- Antenna: 90 degree SMB
- Cable Length: approx 20'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the 20' XM Micro Antenna ONLY
This product has been FACTORY RECONDITIONED to like-new specification excluding minor cosmetic blemishes, if any. This Factory Reconditioned Antenna includes a 90 day Limited Warranty from MyRadioStore.

|  |  | Universal Sirius XM Adhesive / Magnetic Mount Car Antenna This Universal Car Antenna is compatible with both Sirius and XM satellite radio receivers. The perfect solution for users that subscribe to both services or change from one to the other. No longer will you need to have two antennas on your vehicle. The antenna features a magnetic mounting base, as well as an adhesive mounting option to provide you with the utmost flexibility for vehicle installations. The small antenna discreetly installs on any vehicle and its thin cable can easily be hidden under your vehicles molding or weather stripping.
Features:
- Small, low profile design
- Compatible with both XM and Sirius radios
- Antenna can be mounted with adhesive pad or magnetically
- Thin cable easily fits behind moulding and weather stripping
Compatible with the following XM radios:
Compatible with the following Sirius radios:
*This antenna may also be compatible with additional receivers that use the SMB type antenna connection
Specifications:
- XM frequency:2332.5 to 2345 Mhz
- XM polarization: LHCP (satellite) Linear Vertical (terrestrial at horizon
- XM output VSWR: 1.5:1 max
- XM total active gain: 19dB min, 23dB max
- XM LNA noise figure: 1.0dB tp, 1.4dB max
- XM power supply voltage: +3.6 to +5.5 VDC
- Sirius frequency: 2320.0 to 2332.5 Mhz
- Sirius polarization: LHCP (satellite) Linear Vertical (terrestrial at horizon
- Sirius output VSWR: 2.0:1 max
- Sirius total active gain: 33.5dB min, 38.5dB max
- Sirius LNA noise figure: 0.7dB tp, 0.9dB max
- Sirius power supply voltage: +4.8 to +8.0 VDC
- Sirius power supply current: 60 mA max
- Dimensions: 36(w) x 44(l) x 13.8(h) mm
- Cable length: 21 feet

|  |  | 1-Foot XM Radio Micro Car Antenna The 1' XM Micro Antenna is one of the smallest XM Radio antennas available. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's one of the smallest XM antenna ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The original cable length has been shortened to approximately 1 foot of micro-coax cable. Its convenient to transport, the short length avoids tangles, and it's perfect for motorcycles.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz.
- Antenna: 90 degree SMB
- Cable Length: approx 1'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the 1' XM Micro Antenna ONLY

|  |  | 2-Foot XM Radio Micro Car Antenna The 2' XM Micro Antenna is the one of the smallest XM Radio antennas available. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's one of the smallest XM antenna ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The original cable length has been shortened to approximately 2 feet of micro-coax cable. Its convenient to transport, and the short length avoids tangles.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz.
- Antenna: 90 degree SMB
- Cable Length: approx 2'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the 2' XM Micro Antenna ONLY

|  |  | 4-Foot XM Radio Micro Car Antenna The 4' XM Micro Antenna is one of the smallest XM Radio antennas in the world. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's one of the smallest XM antennas ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The original cable length has been shortened to approximately 4 feet of micro-coax cable. Its convenient to transport, and the short length avoids tangles.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz
- Antenna: 90 degree SMB
- Cable Length: approx 4'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the 4' XM Micro Antenna ONLY

|  |  | 10-Foot XM Radio Micro Car Antenna The 10' XM Micro Antenna is one of the smallest XM Radio antennas in the world. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's one of the smallest XM antennas ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The long 10 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz
- Antenna: 90 degree SMB
- Cable Length: approx 10'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the 10' XM Micro Antenna ONLY

|  |  | Delphi XM Radio Micro Car Antenna The Delphi XM Radio Micro Car Antenna is one of the smallest XM Radio antennas in the world. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's one of the smallest XM antennas ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz
- Antenna: 90 degree SMB
- Cable Length: approx 20'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the Delphi XM Radio Micro Car Antenna ONLY

|  |  | Terk XM Radio Car Antenna The Terk XMicro2 XM Radio Micro Car Antenna is one of the smallest XM Radio antenna in the world. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's one of the smallest XM antennas ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- Straight SMB Fakra antenna connector with included 90 degree adapter
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz
- Antenna: 90 degree SMB Fakra with included 90 degree adapter
- Cable Length: approx 20'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the Terk XMicro2 XM Radio Micro Car Antenna ONLY
Now you can even use this micro antenna with any older two lead (yellow and green) XM receiver by adding the Blitzsafe XM-1DAS Antenna Splitter to your order.

|  |  | Belkin XM Radio Micro Car Antenna The Belkin XM Radio Micro Car Antenna is one of the smallest XM Radio antenna in the world. A perfect high-performance antenna for your XM Satellite Radio receiver. Using advanced satellite radio technology, it's one of the smallest XM antennas ever. So small and discreet, its practically invisible. Magnetic mounting with rubber feet allows for immediate installation without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- 90 Degree antenna connector
- Magnet Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.25" W x 1.38" D x 0.5" H
- Weight: 1.9 oz
- Antenna: 90 degree SMB
- Cable Length: approx 20'
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite Gain: 2 dBic average
- Terrestrial Gain: 0 dBic average
- Noise Figure: 1.0 Typical
- Current Consumption: 55mA
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the Belkin XM Radio Micro Car Antenna ONLY

|  |  | Metra ADHESIVE Mount XM Radio Car Antenna This Metra Adhesive Mount Antenna is a perfect high-performance antenna for any XM Satellite Radio receiver. Using advanced satellite radio technology, so small and discreet, its practically invisible. Adhesive mounting means it installs instantly without drilling into your vehicle's surface. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- Right angle SMB antenna connector
- Adhesive Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:

|  |  | Metra MAGNETIC Mount XM Radio Car Antenna This Metra Magnetic Mount Antenna is a perfect high-performance antenna for any XM Satellite Radio receiver. Using advanced satellite radio technology, so small and discreet, its practically invisible. Magnetic mounting means it installs instantly without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- Straight antenna connector with included Fakra adapter
- Magnetic Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.75" W x 1.5" D x 0.5" H
- Weight: 2.7oz
- Antenna: SMB w/ included Fakra adapter
- Cable Length: approx 20'
- Frequency: 2332.5 to 2345.0 Mhz
- Noise Figure: 0.7 to 1.4 Typical
- Current Consumption: 55mA max.
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the Metra Magnetic Mount Antenna ONLY

|  |  | Thru-Glass Mount Antenna The Terk TRK-SR1 glass mount satellite radio antenna is a high performance antenna designed specifically for XM Satellite Radio reception. It adheres and transmits signal through your vehicles glass making installation a breeze. The dual functionality allows it to simultaneous receive signals from satellites and terrestrial repeaters to ensure continuous reception. The result is an antenna that offers all the benefits of satellite radio and complements the appearance of any vehicle. The TRK-SR1 must be wired to a 12volt power source.
This antenna features the dual yellow and green antenna connectors. If you will be using this antenna with a dock or receiver that uses the single SMB type antenna connection then you must also use the single antenna adapter. The adapter must be connected from the yellow antenna lead to your receiver.
Warning - while powered, DO NOT directly join the antenna base to the antenna coupler. Doing so without the glass as a spacer will damage your antenna. This type of damage is not covered under warranty.
Features
- Glass-mounted design uses Terk's exclusive Thru-Glass technology
- Acrylic foam adhesive pads provide years of worry- free enjoyment, yet are removable if necessary.
- Shock & vibration proof.
- Fully adjustable hinged mast can be set to any angel of optimum reception on any surface.
- Antenna folds down to avoid damage at car washed and other low-clearance situations.
- XM approved
- Tested and proven to automotive environmental standards
Includes
- Antenna
- Thru-glass Coupler
- (2) 16' Pre-terminated Micro coaxial cables
- Installation templates
- Owners manual
- (2)Cleaning towelettes
- Car wash protective sleeve

|  |  | SIRXM01 Universal XM/Sirius Mirror Mount Truck Antenna This universal satellite radio antenna will work with both XM and Sirius satellite radio receivers ending the need to have two antennas on your vehicle if you listen to both satellite radio services, or change from one to the other. The antenna quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. For optimal performance, the antenna should be mounted vertically. This extremely versatile antenna can be mounted to any other vehicles such as RV's, off-road vehicles, maritime ships, and motorcycles.
Features:
- Mirror mount design
- Works with both XM and Sirius radios
- Easy installation
- Replaceable 18ft coax cable
- Removable elbow SMB adapter
- Durable, light weight and sleek
Includes:
- Truck antenna
- Mirror mount clamp
- 18ft RG-174 low loss coax cable
- Removable elbow SMB adapter
- Hex screws (4)
- Hex nuts (4)
- Washers (4)
- Open ended washers (4)
- Hex nuts (4)
- Cable ties (4)
Specifications:
- Antenna height: 8 inches
- Dome width: 3 inches
- Cable length: 18 feet
- Cable connectors: SMA - SMB
Compatible with all satellite radios that features the SMB type antenna connection.

|  |  | XMT4 XM Radio Mirror Mount Truck Antenna XMT4 Advanced No Ground Plane Antenna For XM Satellite
Radio Reception. For trucks with tow-style mirrors. The XMT4 truck antenna is XM approved and quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. For optimal performance, the antenna should be mounted vertically. This extremely versatile antenna can be mounted to any other vehicles such as RV's, off-road vehicles, maritime ships, and motorcycles.
Features:
- The Most Advanced XM Antenna Available.
- Mounts Anywhere & Meets/Exceeds XM Spec.
- No Ground Plane Required.
- Weighs Only Few Ounces.
- Can Be Used For Other Sat Radio Services (Sirius) with Limited Performance.
Kit Includes:
- Antenna Assembly (w/ attached cable & L-bracket)
- Indented Flat 2" Square Clamp (w/ 4 holes)
- 4 Sets of Hex Lock-Nuts, Washers, & Bolts
- 5 Pcs of Cable Tie Wraps
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic (20-60 deg elevation) -2 dBi (horizon)
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Linear (Horizon)
LNA
- Gain: 30 dB, typical
- Noise Figure: 1.0 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 60 mA, maximum
- Unwanted Signal Rejection: 40 dB, minimum
Cable
- Type: Coaxial RG-174
- Length: 16 feet
- Connector: 90 degree SMB
Mechanical
- Overall Height: 11.75 inches
- Effective Diameter: 0.75-0.82 inches
- Housing Material: Black ABS, UV Stable
- Mounting: Horizontal or Vertical Tubing 7/16" to 1" Diameter
- Rated Wind Velocity: 150 mph
- Weight: 0.25 Lbs w/out Cable
Temperature
- -40 C to +105 C, operating
- -45 C to +120 C, storage
Quality and Performance Tests
- XM Approved: Per Specification XM-TEC-3-0009-2-RD
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.

|  |  | XMT102 XM Radio Mirror Mount Truck Antenna XMT102 Antenna For XM Satellite Radio Reception. For trucks with tow-style mirrors. The XMT102 truck antenna is XM approved and quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. For optimal performance, the antenna should be mounted vertically. This extremely versatile antenna can be mounted to any other vehicles such as RV's, off-road vehicles, maritime ships, and motorcycles.
Features:
- The Most Advanced XM Antenna Available.
- Mounts Anywhere & Meets/Exceeds XM Spec.
- No Ground Plane Required.
- Weighs Only Few Ounces.
- Can Be Used For Other Sat Radio Services (Sirius) with Limited Performance.
Kit Includes:
- Antenna Assembly (w/ attached cable & L-bracket)
- Universal Aluminum 2" Square Clamp (w/ 4 holes)
- 4 Sets of Hex Lock-Nuts, Washers, & Bolts
- 6 Pcs of Cable Tie Wraps
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic (20-60 deg elevation) -2 dBi (horizon)
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Linear (Horizon)
LNA
- Gain: 30 dB, typical
- Noise Figure: 1.0 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 60 mA, maximum
- Unwanted Signal Rejection: 40 dB, minimum
Cable
- Type: Coaxial RG-174
- Length: 16 feet
- Connector: 90 degree SMB
Mechanical
- Overall Height: 11.75 inches
- Effective Diameter: 0.75-0.82 inches
- Housing Material: Black ABS, UV Stable
- Mounting: Horizontal or Vertical Tubing 7/16" to 1" Diameter
- Rated Wind Velocity: 150 mph
- Weight: 0.25 Lbs w/out Cable
Temperature
- -40 C to +105 C, operating
- -45 C to +120 C, storage
Quality and Performance Tests
- XM Approved: Per Specification XM-TEC-3-0009-2-RD
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.

|  |  | XM500 XM Radio Clip Mount Truck Antenna This antenna will clamp mount to the air dam shield or flap of long-haul trucks, or similar installation. This antenna can also be mounted to any flat surface able to accomodate a clamp-style mount bracket.
For best performance, the black antenna housing at the top of the mast should be installed above any other truck parts for an unobstructed view of the sky in all directions. A sample installation is shown to in this photo.
Features:
- Ground Plane independent - no metal surface needed
- 30 foot Heavy-gauge RG58/U low loss coaxial cable
- Field replaceable sub-assembly components (see replacement parts)
- Rugged antenna withstands high-vibration environment
- High performance meets XM Satellite Radio specifications
Kit Includes:
- Antenna Assembly (w/ attached cable)
- Angle Bracket
- Clamp Bracket Assembly
- Hex Nuts & Washers
- Pink Fakra Housing
- 90 Degree SMB Adapter
- 8 Pcs of Cable Tie Wraps
- 6 Pcs of Cable Tie Mounts
This antenna is designed for single antenna lead XM Satellite Radio receivers. It may also be used with older dual antenna lead receivers with the addition purchase of an optional splitter. This antenna is NOT compatible with XM PCR, Sony PnP, or XM Boomboxes.
Installation instructions included. Not recommended for round bar mounting.

|  |  | XM4 XM Radio Universal Mount Truck Antenna This antenna is universally designed for trucks and RVs that employ a single arm (single antenna lead) XM Satellite Radio applications. There are several methods of clamping this antenna; Mirror Mounting, Air Dam Shield Mounting, Flap Mounting to the trucks cab and any flat surface accommodating the U-Bracket clamp style mounting.
Features:
- Environmentally tested and validated
- Low-profile design maximizes installation options
- Robust Antenna Design to Withstand Long Haul Truck Vibration Environments
- High Performance meets XM Satellite Radio Specifications
Kit Includes:
- 1 Antenna Assemply
- 1 Mirror Mount Clamp A
- 1 Mirror Mount Clamp B
- 4 M6XP1.0 Hex Screws
- 4 M6 Washers
- 4 M6 Lock Washers
- 4 M6XP1.0 Hex Nuts
- 1 3/4 Ext. Tooth Lock Washer
- 1 3/4-16 Hex Nut
- 1 U-Bracket Assembly
- 1 Air Dam Shield Clamp D
- 1 3/8-16 Hex Nut
- 1 3/8 Split Lock Washer
- 1 21 Foot RG-174/U Low-Loss Coaxial Cable with Right Angle SMB Connector
- Illustated Mounting Instructions
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
LNA
- Gain: 30 dB, typical
- Noise Figure: 0.9 dB, maximum
Cable
- Type: Coaxial RG-174
- Length: 21 feet
- Connector: 90 degree SMB
Mechanical
- Overall Height: 10 inches
- Effective Diameter: 0.75-0.82 inches
- Diameter: 3.75"
- Weight: 0.88 Lbs w/out Cable
Temperature
- -40 C to +185 C, operating
- -45 C to +120 C, storage
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector. MyRadioStore also has a 25' Replacement Cable available.

|  |  | SR-3653 XM Radio Clamp or Mirror Mount Truck Antenna This antenna is designed for long-haul trucks that employ a single arm (single antenna lead) XM Satellite Radio applications. There are several methods of clamping this antenna to the long-haul truck; Mirror Mounting, Air Dam Shield Mounting, Flap Mounting to the trucks cab and any flat surface accommodating the U-Bracket clamp style mounting.
Features:
- Aerodynamic Antenna Assemply Design
- Ground Plane Independent Design
- Field Replaceable Sub-Assembly Components
- Robust Antenna Design to Withstand Long Haul Truck Vibration Environments
- High Performance meets XM Satellite Radio Specifications
Kit Includes:
- 1 Antenna Assemply
- 1 Mirror Mount Clamp A
- 1 Mirror Mount Clamp B
- 4 M6XP1.0 Hex Screws
- 4 M6 Washers
- 4 M6 Lock Washers
- 4 M6XP1.0 Hex Nuts
- 1 3/4 Ext. Tooth Lock Washer
- 1 3/4-16 Hex Nut
- 1 U-Bracket Assembly
- 1 Air Dam Shield Clamp D
- 1 3/8-16 Hex Nut
- 1 3/8 Split Lock Washer
- 1 21 Foot RG-174/U Low-Loss Coaxial Cable with 90 degree SMB Connector
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
LNA
- Gain: 30 dB, typical
- Noise Figure: 0.9 dB, maximum
Cable
- Type: Coaxial RG-174
- Length: 21 feet
- Connector: 90 degree SMB
Mechanical Specifications
- Overall Height: 10 inches
- Effective Diameter: 0.75-0.82 inches
- Diameter: 3.75"
- Weight: 0.88 Lbs w/out Cable
Temperature
- -40 C to +185 C, operating
- -45 C to +120 C, storage
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector. MyRadioStore also has a 25' Replacement Cable available.

|  |  | BRX30 XM Mirror Mount 30 Inch Truck Antenna The Browning BRX30 truck antenna features a 30 inch mast, giving your antenna the height it needs to attain the strongest signal. It quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. This extremely versatile antenna can also be mounted to other vehicles such as RV's, off-road vehicles, maritime ships. Its heavy duty design is built to withstand use in high winds and high vibration areas.
Features:
- Compatible with all XM Radios that feature SMB antenna connections
- 30 inch heavy duty, sleek design
- 3-Way stainless steel mount
- Right-angle SMB antenna connection
- 17-Ft heavy-duty think RG-174 coaxial cable
Specifications:
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite gain: 5dBic typical
- Terrestrial gain: -1dBic typical
- Noise figure: 1.0 dB max
- Current consumption: 45mA typical 55mA max.
- Supply voltage: 4.7 volts typical
- Operating temperature: -40*F to 220*F
This antenna is compatible all XM Satellite Receivers. It is NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.

|  |  | 2315 XM Radio Mirror Mount Truck Antenna The Tram 2315 truck antenna quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. Perfect for trucks with tow-style mirrors. For optimal performance, the antenna should be mounted vertically. This extremely versatile antenna can also be mounted to other vehicles such as RV's, off-road vehicles, maritime ships, and motorcycles.
Features:
- Compatible with all XM Radios that feature an SMB antenna connection
- Compact, sleek design
- 3-Way stainless steel mount
- Hermetically sealed antenna
- Gold plated right-angle SMB antenna connection
- 10-Ft heavy-duty think RG-174 coaxial cable
Specifications:
- Frequency: 2332.5 to 2345.0 Mhz
- Satellite gain: 5dBic typical
- Terrestrial gain: -1dBic typical
- Noise figure: 1.0 dB max
- Current consumption: 45mA typical 55mA max.
- Supply voltage: 4.7 volts typical
- Operating temperature: -40*F to 220*F
- Antenna height: 10 inches
This antenna is compatible all XM Satellite Receivers. It is NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.

|  |  | MSTRSAT Universal XM/Sirius Mirror Mount Truck Antenna This universal satellite radio antenna with will with both XM and Sirius satellite radio receivers. Ending the need to have two antenna on your vehicle if you listen to both Satellite radio companies or change from one to the other. The antenna quickly mounts to any vertical or horizontal tube up to 1-1/10" diameter. For optimal performance, the antenna should be mounted vertically. This extremely versatile antenna can be mounted to any other vehicles such as RV's, off-road vehicles, maritime ships, and motorcycles.
Features:
- Universal Design Works with All Satellite Radio Services
- Stainless Steel Mirror Mount
- 21' Military Specification RF-58U Cable with Gold Plated Connectors
- Antenna cable disconnects for easy installation
Includes:
- Antenna assembly with mounting bracket
- Indented Flat 2" square clamp w/ 4 holes
- 21ft antenna cable
- Four sets of hex lock-nuts, washers, & bolts
Specifications
- Hermetically Sealed Antenna
- Frequency: 2320.0 to 2345.0MHz
- Satellite Gain: 5dBic Typical / Terrestrial Gain: -1dBic Typical
- Noise Figure: 1.0dB Max
- Current Consumption: 45mA Typical/55mA Maximum
- Supply Voltage: 4.7-Volts Typical
- Operating Temperature: -40*F to 220*F
Compatible with all satellite radios that features the SMB type antenna connection.

|  |  | XMM4 XM Radio Marine Antenna XMM4 Advanced No Ground Plane Antenna For XM Satellite
Radio Reception.
Features:
- The Most Advanced XM Antenna Available.
- Mounts Anywhere & Meets/Exceeds XM Spec.
- No Ground Plane Required.
- Weighs Only Few Ounces.
- Constructed Of All Marine Grade Materials.
- Marine Antenna Mount Included.
- Can Be Used For Other Sat Radio Services (Sirius) with Limited Performance.
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic (20-60 deg elevation) -2 dBi (horizon)
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Linear (Horizon)
LNA
- Gain: 30 dB, typical
- Noise Figure: 1.0 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 50 mA, maximum
- Unwanted Signal Rejection: 35 dB, minimum
Cable
- Type: Coaxial RG-58A/U
- Length: 30 feet
- Connector: SMB
Mechanical
- Overall Height: 10.25 inches
- Effective Diameter: 0.75-0.82 inches
- Housing Material: White ABS, UV Stable
- Mounting: Fits Standard Marine Antenna Base (Included)
- Rated Wind Velocity: 100 mph
- Weight: 0.25 Lbs w/out Cable
Temperature
- -40 C to +105 C, operating-45 C to +120 C, storage
Quality and Performance Tests
- XM Approved: Per Specification XM-TEC-3-0009-2-RD
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.

|  |  | Delphi SA10100 Marine Antenna XM Satellite Radio increases the quality of your boating time with over 170 channels of quality programming. This Delphi Marine Antenna is a high-performance marine antenna, designed to provide crystal-clear XM Radio reception on the water.
The antenna is tested to withstand extreme environmental conditions - its sealed housing is impervious to damage from salt water or bad weather. The antenna installs using the standard marine mounting bracket, and the 20' cable connects to any XM tuner.
Important Note: You must subscribe to XM Satellite Radio to receive the satellite radio signal. XM satellite radio has an offshore range of at least 100 miles (or more, depending on your location) off the coast of the lower 48 states; service is not available in Alaska or Hawaii.
Kit Includes:
- Delphi Marine Antenna
- Mounting Bracket
- 20 Foot Coaxial Cable with SMB/Fakra connector
- Pink Fakra Adapter
- 4 Sets of Bolts, Washers, & Nuts
- 4 Cable Tie Wraps
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Omni-directional
LNA
- Gain: 30 dB, typical
- Noise Figure: 1.2 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 55 mA, maximum
- Unwanted Signal Rejection: 25 dB, minimum
Cable
- Type: Coaxial
- Length: 20 feet
- Connector: SMB/ Fakra
Mechanical
- Overall Height: 11.75 inches
- Housing Material: White Polycarbonate
- Diameter: 1.88"
- Rated Wind Velocity: 150 mph
- Weight: 2.1 Lbs w/out Cable
Temperature
- -40 C to +105 C, operating
- -45 C to +120 C, storage
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with a dual-lead connector.

|  |  | Terk XM5 Marine Antenna XM Satellite Radio increases the quality of your boating time with over 100 channels of quality programming. Terk's XM5 is a high-performance marine antenna, designed to provide crystal-clear XM Radio reception on the water.
The antenna is tested to withstand extreme environmental conditions - its sealed housing is impervious to damage from salt water or bad weather. The antenna installs using the standard marine mounting bracket, and the 30' cable connects to any XM tuner.
Important Note: You must subscribe to XM Satellite Radio to receive the satellite radio signal. XM satellite radio has an offshore range of at least 100 miles (or more, depending on your location) off the coast of the lower 48 states; service is not available in Alaska or Hawaii.
Kit Includes:
- XM5 Antenna
- Mounting Bracket
- Pink Fakra Adapter
- 4 Sets of Bolts, Washers, & Nuts
- 4 Cable Tie Wraps
- Instruction Manual
Specifications:
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Omnidirectional
- Gain: 30 dB, typical
- Noise Figure: 1.2 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 55 mA, maximum
- Unwanted Signal Rejection: 25 dB, minimum
- Cable type: Coaxial
- Cable length: 30 feet
- Cable connector: SMB/ Fakra
- Housing Material: White Polycarbonate
- Height: 11.75 inches
- Diameter: 1.88"
- Rated Wind Velocity: 150 mph
- Weight: 2.1 Lbs w/out Cable
- Operating temperature -40 C to +105 C,
- Storage temperature -45 C to +120 C,
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with a dual-lead connector.

|  |  | Single Antenna Adapter Use this Roady Antenna Adapter to connect ANY XM Satellite Radio Antenna to your original Roady, Roady 2, or XM2go Car or Home cradles.
This adapter cable plugs into either the green or yellow antenna lead that are present on older, two-lead style XM Satellite Radio antennas, or into the single pink antenna connector. The other end of this adapter connects perfectly into your original Roady, Roady 2, Roady XT, Audiovox Xpress, XM2go Car or Home cradles.
Also adapts the single lead pink colored antenna connector for use with the original Roady, Roady 2, XM2go Car or Home cradles.
When deciding whether to use the green or yellow antenna lead from your older, two-lead style XM Satellite Radio antenna, try both, and use the one that gives you better performance. If the "antenna" message should appear on your Roady's display, use the other colored lead instead.
Please note that although high quality parts are used in this products construction, some signal loss may occur at the connections causing reception in fringe areas to be adversly affected. Roady Antenna Adapter cable is approximately 6 inches long. WILL NOT allow any antenna to plug directly into the side of XM2go receivers.
This antenna adapter is also compatible with all Sirius radios that feature the standard SMB antenna type connector.

|  |  | 50-Foot Delphi Antenna Extension Cable The Audiovox 50-Foot cable is in stock and is identical to this one.
If you're using the Delphi SKYFi or Roady in your home or office, this 50-foot extension cable expands the installation options of the indoor/outdoor XM antenna (with its 20' cable) that's included with the home kit.
Extension Cables can be daisy chained together for up to 400 feet.
Specifications:
- Gain: 10dB +/- 1dB at 2.3 GHz
- NF: 5dB
- Current Draw: 10 mA
- Frequency Range: 2.3-2.4 GHz
- Impedance: 50 ohms
- VSWR: <2:1
This item WILL work with the SkyFi boombox, home kit, XM PCR, Roady and/or Roady 2. This will NOT work with the Skyfi Car Kit Cradle.
Note: When used in conjunction with the CNP2000H, the use of a 90 degree antenna plug to a straight plug adapter is required.

|  |  | 50-Foot Terk Antenna Extension Cable This 50-foot extension cable extends the installation options of the indoor/outdoor XM antenna that's included with the boom box, home or car kit.
Extension Cables can be daisy chained together for up to 400 feet.
Specifications:
- Gain: 10dB +/- 1dB at 2.3 GHz
- NF: 5dB
- Current Draw: 10 mA
- Frequency Range: 2.3-2.4 GHz
- Impedance: 50 ohms
- VSWR: <2:1
- Installation guide
NOT compatible with CNP1000.

|  |
|