 |  | 
 | XM Radio Boombox Home Antenna The Delphi XM Home Antenna allows you to to receive XM's signal so you can enjoy XM through your home stereo system. While the antenna does NOT have a magnetic base for mounting, it does come with a folding stand complete with screw holes for a more permanent mounting solution.
Features:
- Waterproof for outside use
- Excellent compatibility - Works with most XM Satellite Receivers
- Folding stand with screw holes - For permanent mounting
Compatible with:
Specifications:
- Dimensions: 2.75" W x 3.63" H x 1" D
- Weight: .37 lb.
- Antenna: SMB
- Cable Length: approx 20'
Please note: This XM Radio Boombox Home Antenna should not be used with the XMBB1 Portable Sound System. Its straight connector tip will interfere with the sound systems rear cover. The Compact XM Radio Home Antenna should be used with the XMBB1 Portable Sound System.

|  |  | 10-Foot Delphi XM Radio Home Antenna The Delphi XM Home Antenna allows you to to receive XM's signal so you can enjoy XM through your home stereo system. While the antenna does NOT have a magnetic base for mounting, it does com with a folding stand complete with screw holes for a more permanent mounting solution.
Features:
- Waterproof for outside use
- Excellent compatibility - Works with most XM Satellite Receivers
- Folding stand with screw holes - For permanent mounting
Compatible with:
Specifications:
- Dimensions: 2.75" W x 3.63" H x 1" D
- Weight: .37 lb.
- Antenna: SMB
- Cable Length: approx 10'
Note: This is the Delphi XM home antenna ONLY

|  |  | Metra ADHESIVE Mount XM Radio Car Antenna This Metra Adhesive Mount Antenna is a perfect high-performance antenna for any XM Satellite Radio receiver. Using advanced satellite radio technology, so small and discreet, its practically invisible. Adhesive mounting means it installs instantly without drilling into your vehicle's surface. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- Right angle SMB antenna connector
- Adhesive Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:

|  |  | Metra MAGNETIC Mount XM Radio Car Antenna This Metra Magnetic Mount Antenna is a perfect high-performance antenna for any XM Satellite Radio receiver. Using advanced satellite radio technology, so small and discreet, its practically invisible. Magnetic mounting means it installs instantly without drilling into your vehicle's surface. The antenna can be easily removed if you sell your vehicle or return it at lease end. The extra long 20 foot micro-coax cable can be routed around window moldings and through access holes for a professional, low-profile installation.
Features:
- Rubber feet to avoid scratching any car finish
- Straight antenna connector with included Fakra adapter
- Magnetic Mount
- Excellent compatibility - Works with most XM Satellite Receivers
- Paintable
Compatible with:
Specifications:
- Dimensions: 1.75" W x 1.5" D x 0.5" H
- Weight: 2.7oz
- Antenna: SMB w/ included Fakra adapter
- Cable Length: approx 20'
- Frequency: 2332.5 to 2345.0 Mhz
- Noise Figure: 0.7 to 1.4 Typical
- Current Consumption: 55mA max.
- Supply Voltage: 4.7V Typical (from XM Receiver)
- Operating Temperature: -40 F to 185 F
Note: This is the Metra Magnetic Mount Antenna ONLY

|  |  | XMM4 XM Radio Marine Antenna XMM4 Advanced No Ground Plane Antenna For XM Satellite
Radio Reception.
Features:
- The Most Advanced XM Antenna Available.
- Mounts Anywhere & Meets/Exceeds XM Spec.
- No Ground Plane Required.
- Weighs Only Few Ounces.
- Constructed Of All Marine Grade Materials.
- Marine Antenna Mount Included.
- Can Be Used For Other Sat Radio Services (Sirius) with Limited Performance.
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic (20-60 deg elevation) -2 dBi (horizon)
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Linear (Horizon)
LNA
- Gain: 30 dB, typical
- Noise Figure: 1.0 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 50 mA, maximum
- Unwanted Signal Rejection: 35 dB, minimum
Cable
- Type: Coaxial RG-58A/U
- Length: 30 feet
- Connector: SMB
Mechanical
- Overall Height: 10.25 inches
- Effective Diameter: 0.75-0.82 inches
- Housing Material: White ABS, UV Stable
- Mounting: Fits Standard Marine Antenna Base (Included)
- Rated Wind Velocity: 100 mph
- Weight: 0.25 Lbs w/out Cable
Temperature
- -40 C to +105 C, operating-45 C to +120 C, storage
Quality and Performance Tests
- XM Approved: Per Specification XM-TEC-3-0009-2-RD
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with either a dual-lead connector or a pink Fakra connector.

|  |  | Delphi SA10100 Marine Antenna XM Satellite Radio increases the quality of your boating time with over 170 channels of quality programming. This Delphi Marine Antenna is a high-performance marine antenna, designed to provide crystal-clear XM Radio reception on the water.
The antenna is tested to withstand extreme environmental conditions - its sealed housing is impervious to damage from salt water or bad weather. The antenna installs using the standard marine mounting bracket, and the 20' cable connects to any XM tuner.
Important Note: You must subscribe to XM Satellite Radio to receive the satellite radio signal. XM satellite radio has an offshore range of at least 100 miles (or more, depending on your location) off the coast of the lower 48 states; service is not available in Alaska or Hawaii.
Kit Includes:
- Delphi Marine Antenna
- Mounting Bracket
- 20 Foot Coaxial Cable with SMB/Fakra connector
- Pink Fakra Adapter
- 4 Sets of Bolts, Washers, & Nuts
- 4 Cable Tie Wraps
Specifications:
Electrical
- Frequency: 2332.5 to 2345.0 MHz
- Gain 2 dBic
- Bandwidth: 12.5 MHz
- Impedance: 50 ohms
- Polarization LHCP (20-60 deg elevation) Omni-directional
LNA
- Gain: 30 dB, typical
- Noise Figure: 1.2 dB, maximum
- Power: 4.5 Vdc, nominal
- Current Drain: 55 mA, maximum
- Unwanted Signal Rejection: 25 dB, minimum
Cable
- Type: Coaxial
- Length: 20 feet
- Connector: SMB/ Fakra
Mechanical
- Overall Height: 11.75 inches
- Housing Material: White Polycarbonate
- Diameter: 1.88"
- Rated Wind Velocity: 150 mph
- Weight: 2.1 Lbs w/out Cable
Temperature
- -40 C to +105 C, operating
- -45 C to +120 C, storage
This antenna is compatible all XM Satellite Receivers. NOT compatible with SKYFi car cradles with a dual-lead connector.

|  |  | 50-Foot Delphi Antenna Extension Cable The Audiovox 50-Foot cable is in stock and is identical to this one.
If you're using the Delphi SKYFi or Roady in your home or office, this 50-foot extension cable expands the installation options of the indoor/outdoor XM antenna (with its 20' cable) that's included with the home kit.
Extension Cables can be daisy chained together for up to 400 feet.
Specifications:
- Gain: 10dB +/- 1dB at 2.3 GHz
- NF: 5dB
- Current Draw: 10 mA
- Frequency Range: 2.3-2.4 GHz
- Impedance: 50 ohms
- VSWR: <2:1
This item WILL work with the SkyFi boombox, home kit, XM PCR, Roady and/or Roady 2. This will NOT work with the Skyfi Car Kit Cradle.
Note: When used in conjunction with the CNP2000H, the use of a 90 degree antenna plug to a straight plug adapter is required.

|  |  | 50-Foot Terk Antenna Extension Cable This 50-foot extension cable extends the installation options of the indoor/outdoor XM antenna that's included with the boom box, home or car kit.
Extension Cables can be daisy chained together for up to 400 feet.
Specifications:
- Gain: 10dB +/- 1dB at 2.3 GHz
- NF: 5dB
- Current Draw: 10 mA
- Frequency Range: 2.3-2.4 GHz
- Impedance: 50 ohms
- VSWR: <2:1
- Installation guide
NOT compatible with CNP1000.

|  |
|