|
|
The Sirius Echo Repeater System allows you to enjoy Sirius programming even in interior environments without direct satellite reception (e.g., away from a window with a clear view of the sky). The compact transmitter works with any Sirius Receiver home kit or audio system, rebroadcasting more than 170 Sirius Satellite Radio channels of sports, talk, news, comedy, 100 percent commercial-free music, and more. The Sirius Echo Repeater System transmitter converts the Satellite radio signal it receives from a home antenna to a 900 MHz signal capable of penetrating throughout the surrounding environment. The repeater antenna will then pick up the 900 MHz signal and converts it back to the satellite radio signal. In essence, it serves as a wireless extension cable. Features:
Kit includes:
Specifications:
|
|
|
The Echo Antenna, which can be connected to any Sirius radio, receives the signal from the Sirius Echo Transmitter. Now multiple Sirius radios can be configured with your Sirius ECHO transmitter (sold separately). Allowing them to be conveniently located anywhere in your home, even in interior rooms, without restrictions due to antenna placement. Features:
Specifications:
|
|
|
The Sirius Home Signal Distribution Kit for satellite radio will allow you to connect one or two Sirius radios using only one included outdoor antenna. The antenna installs using standard RG-6 cable (not included), which is the same cable used in cable TV installations. This allows you great flexibility as to where you locate the outdoor antenna and your Sirius Satellite radios. The outdoor antenna is a high-performance antenna, specifically designed to receive signals from the Sirius satellites and terrestrial (ground) transmitters. Features:
Includes:
Specifications:
Please note: This Signal Distribution Kit additionally requires the use of RG-6 cables (not included). |
|
|
| Combine your DishNetwork / DIRECTV signal and Sirius signal into one cable. |
|
|
| Combine your DishNetwork / DIRECTV signal and Sirius signal into one cable. |
|
|
The Sirius/DBS Signal Combiner/Splitter allows you to combine your DishNetwork or DIRECTV signal with the Sirius signal into one RG-6 cable (not included), avoiding the necessity of installing a separate cable from the Sirius antenna to the Sirius receiver. Instead, both the satellite TV signal and Sirius signal are combined together outdoors near the satellite TV dish and, later, inside the home at a convenient location, the combined signal is split back into two separate signals. Features:
Includes:
Does not include any of the required cables for installation. |
|
|
| Combine your Cable TV signal and Sirius signal into one cable. |
|
|
| Connects two Sirius receivers using only one antenna. |
|
|
The PRO-600 is a high performance commercial grade antenna that has been designed to receive both XM and Sirius satellite signals. Its wide beam-width allows for a secure installation with fast alignment and adjustability. It is backwards compatible with all existing satellite radio receivers and is ideal for use with next generation interoperable receivers. The internal amplifier will drive up to 200 feet of RG-6 cable (not included) without the need for external amplifiers. Features
Includes:
|
|
|
This splitter kit will allow you to provide two satellite radios with signal using one satellite radio antenna. The Two Way Passive Splitter Kit is designed to operate with any XM or Sirius satellite radio receiver and antenna. It is equipped with female F-connectors and designed to operate with standard RG-6 cable (not included). For proper operation the total cable length from the antenna to the radio should not exceed the antenna's maximum cable length rating minus 50 feet. For example if the antenna is rated to be able to drive up to 200 feet of RG-6 cable, then the sum of all the cable runs from the antenna through the splitter to the radio that is farthest away should not exceed 150 feet. For longer runs, purchase model SBA-1 line amplifier which will allow up to 145 feet of additional cable in the run. Includes:
*Note: A setup diagram can be viewed by clicking the "more photos" tab. Installation will additionally require RG-6 cables and may also require additional adapters for the connection of your satellite radio antenna. |
|
|
This amplified splitter is optimized for use with all satellite radio systems. It includes the adapters and accessories necessary to permit the operation of two satellite radios from a single satellite radio antenna. In order to maintain the proper RF link budget for the radio, the splitter loss at 2.35 Ghz has been compensated by an internal amplifier. This amplifier is powered by the DC voltage that is supplied by any of the radios connected to its output. The splitter will pass the DC voltage supplied by a radio at any output port to the splitter input port. This will provide power to any antenna connected to this port for the antenna's internal low-noise amplifier (LNA). Standard RG-6 cable with male F-connectors (not included) can be used to extend the output cable lengths. The splitter has 10db of excess gain to permit output extensions of up to 90 feet. If cable extensions greater than 90 feet are desired, we recommend using Model SBA-1 line extension amplifier(s) with the splitter. One amplifier placed at the input of the splitter will permit total cable lengths of up to 200 feet from each individual output port to the radio. This splitter has been designed with an output impedance that replicates that of a satellite radio antenna so that the radio will operate in its normal mode without the need for external impedance terminations devices. We recommend the use of a Pro-500 or Pro-600 satellite radio antenna with this splitter. For use with a standard home antenna the additional purchase of this adapter is required. Includes:
Specifications:
|
|
|
This amplified splitter is optimized for use with all satellite radio systems. It includes the adapters, cables and accessories to permit operation of two satellite radios from a single antenna. In order to maintain the proper RF link budget for the radio, the splitter loss at 2.35 GHz has been compensated by an amplifier. This amplifier is powered by the DC voltage that is supplied by any of the radios connected to its output. For XM this nominal voltage is 4.5 VDC. For Sirius the nominal voltage is 6.5 VDC. The splitter is compatible with either satellite radio system. The splitter will pass the DC voltage supplied by a radio at any output port to the splitter input port. This will provide power to any antenna connected to this port for the antenna’s internal low-noise amplifier (LNA). Standard RG-6 cable with male F-connectors (not supplied) can be used to extend the output cable lengths. The splitter has 7 dB of excess gain to permit output extensions of up to 60 feet. If cable extensions greater than 60 feet are desired, we recommend using Pixel Model SBA-1 line extension amplifier(s) with the splitter. One amplifier (for example) placed at the input of the splitter will permit total cable lengths of up to 175 feet from each individual output port to the radios. For cable runs exceeding 250 feet between the antenna and splitter, the use of Model PS-1 power inserter is recommended to power the antenna and line amplifiers. Package Includes:
|
|
|
This amplified splitter is optimized for use with all satellite radio systems. It includes the adapters, cables and accessories to permit operation of multiple (up to four) satellite radios from a single antenna. In order to maintain the proper RF link budgetfor the radio, the splitter loss at 2.35 GHz has been compensated by an internal amplifier. This amplifier is powered by the DC voltage that is supplied by any of the radios connected to its output. The splitter will pass the DC voltage supplied by a radioat any output port to the splitter input port. This will provide power to any antenna connected to this port for the antenna’s internal low-noise amplifier (LNA). Standard RG-6 cable with male F-connectors (not supplied) can be used to extend the output cable lengths. The splitter has 8 dB of excess gain to permit output extensions of up to 70 feet. If cable extensions greater than 70 feet are desired, we recommend using Pixel Model SBA-1 line extension amplifier(s) with the splitter. One amplifier (for example) placed at the input of the splitter will permit total cable lengths of up to 200 feet from each individual output port to the radios. This splitter has been designed with an output impedance that replicates that of a satellite radio antenna so the radio will operate in its normal mode without the need for external impedance terminating devices. Unused output ports do not have to be terminated for proper operation. This splitter can also be cascaded with Pixel Model SRSC-2 and Pixel Model SRSC-4 couplers to form 8-Way and 16-Way splitter networks without the need for external power inserters. Note: For operation in close proximity to high power satellite radio terrestrial repeaters. Please use the supplied 20 Db attenuator on the input of the splitter to avoid amplifier overload. Otherwise this attenuator is not required. Package Includes:
Note: Actually kit may vary. Amplifiers may be contained within splitter. |
|
|
This kit includes the adapters, cables, splitter, amplifiers and impedance transformers to operate multiple satellite radios from a single standard antenna and allows the use of standard RG-6 cable for connections. This kit has been designed to maintain the proper RF link budget for the radios and not degrade the C/N or BER (Bit Error Rate) of the received signal. The splitter loss at 2.35 GHz is overcome by the amplifiers gain located at the input to the splitter. The splitter is power passing on all ports (diode protected) and passes the DC output of the each radio to power the antenna and amplifiers. For RG-6 cable runs to or from the splitter exceeding 25 feet it is necessary to use additional amplifiers (Model SBA-1) to overcome cable loss and maintain proper signal levels. (See Figure 1 for guidelines). For cable runs exceeding 250 feet between the antenna and splitter, the use of Model PS-1 power inserter is recommended to power the antenna and line amplifiers. Note: Actually kit may vary. Amplifiers may be contained within splitter. |
|
|
For use with dual Satellite Radio antennas, the ANT-1 allows you to combine the output of an XM antenna and Sirius antenna into a single feed that can be used with both satellite radio services simultaneously. Features:
Kit includes:
|
|
|
This unit consists of a 4.5-5.0 VDC power supply for use in RG-6 networks designed to distribute Satellite Radio signals.The power supply has been pre-adjusted to output 4.5VDC at current levels up to 1 amp max. CAUTION: Do not adjust the power supply for voltages higher than 4.5VDC. Damage to the antenna's low-noise amplifier will result. Kit includes:
Connect the power inserter prior to any splitters or radios to provide power to line amplifiers and the antenna's internal low noise amplifier up-stream. The output of the inserter labeled "Radio" is DC blocked. The output of the inserter labeled "Ant" passes DC power to the antenna. The power supply should be connected to the input on the inserter labeled "DC IN". If a Satellite Radio is connected directly to the "Radio" output of the power inserter, use a model EXT -1 (three foot F to SMB) jumper cable (sold separately). In this configuration the impedance terminator included with the power inserter must be attached to the inserter's "Radio" output prior to connecting the jumper. |
|
|
This amplifier is rated to provide 16 Db of gain between 2320 and 2345 MHz when powered at 4.5 VDC (minimum) and is intended for use in overcoming cable and splitter losses in satellite radio distribution networks. It includes a removable female to male F adapter that mates this amp to different gender F cables. Specifications:
|
|
|
Use this F-Jack to SMB-Plug adapter to convert standard Satellite Radio antenna connectors on your home Satellite Radio receivers to F-type connections. This will allow you to run the Radio signal through regular RG-6 Cable-TV type cable. Please note that some signal loss may occur and for extended runs over 50 feet, a signal amplifier is recommended. Satellite Radio signals require their own cable and cannot be used on the same cable as Cable TV, Satellite TV, or any other service. A Satellite Radio antenna is required. The SMB Plug connects to most Satellite Radio receivers. |
|
|
Use this F-Jack to SMB-Plug adapter cable to convert standard Satellite Radio antenna connectors on your home radio receivers to F-type connections. This will allow you to run the radio signal through regular RG-6 Cable-TV type cable. Please note that some signal loss may occur and for extended runs over 50 feet, a signal amplifier is recommended. Satellite Radio signals require their own cable and cannot be used on the same cable as Cable TV, Satellite TV, or any other service. Cable is 6 inches long. A Satellite Radio antenna is required. The SMB plug connects to most Satellite Radio receivers. |
|
|
Use this F-Jack to SMB-Jack adapter to convert standard Satellite Radio antenna connector to F-type connections. This will allow you to run the Satellite Radio signal through regular RG-6 Cable-TV type cable. Please note that some signal loss may occur and for extended runs over 50 feet, a signal amplifier is recommended. Satellite Radio signals require their own cable and cannot be used on the same cable as Cable TV, Satellite TV, or any other service. The SMB Jack connects to most Satellite Radio antennas. |
|
|
Use this F-Jack to SMB-Jack adapter cable to convert standard Satellite Radio antenna connectors on your home Satellite Radio antenna to F-type connections. This will allow you to run the Satellite Radio signal through regular RG-6 Cable-TV type cable. Please note that some signal loss may occur and for extended runs over 50 feet, a signal amplifier is recommended. Satellite Radio signals require their own cable and cannot be used on the same cable as Cable TV, Satellite TV, or any other service. Cable is 6 inches long. A Satellite Radio antenna is required. The SMB jack connects to most Satellite Radio antennas. |
|
|
This adapter will allow you to use the sharkfin antenna that comes standard on some Lexus vehicles with an aftermarket satellite radio. It is compatible with 2007 and up Lexus IS or LS vehicles. The perfect way to integrate satellite radio into your Lexus without compromising the look of your car. This adapter can be used for both XM and Sirius satellite radio. It features 12-foot of cable and a SMB plug connector at one end that directly connects to your satellite radio receivers car dock. *Note: Close-up photos of the connectors can be viewed by clicking the "more photos" tab. |
|
|
This adapter will allow you to use the sharkfin antenna that comes standard on some Lexus vehicles with an after market satellite radio. It is compatible with 2007 and up Lexus GS vehicles. The perfect way to integrate satellite radio into your Lexus without compromising the look of your car. This adapter can be used for both XM and Sirius satellite radio. It features 12-foot of cable and a SMB plug connector at one end that directly connects to your satellite radio receivers car dock. *Note: Close-up photos of the connectors can be viewed by clicking the "more photos" tab. |
|
|
This adapter connects a dual lead factory installed XM vehicle antenna to an XM or Sirius satellite radio. For GM vehicle owners that switch from the factory installed XM to Sirius using the GM Sirius Connect this adapter will allow you to use the factory installed XM satellite radio antenna. When using an XM antenna for Sirius radio you will experience a slight loss in signal strength. This adapter cable is approximately 9 feet long. This adapter will only work with dual input factory installed XM or Sirius antennas. Please visually verify the antenna connection in your vehicle. |
|
|
This adapter connects a single lead factory installed XM vehicle antenna to an XM or Sirius satellite radio. For GM vehicle owners that switch from the factory installed XM to Sirius using the GM Sirius Connect this adapter will allow you to use the factory installed XM satellite radio antenna. When using an XM antenna for Sirius radio you will experience a slight loss in signal strength. This adapter cable is approximately 9 feet long. This adapter will only work with single input factory installed XM/Sirius antennas. Please visually verify the antenna connection in your vehicle. |
|
|
Use this Roady Antenna Adapter to connect ANY XM Satellite Radio Antenna to your original Roady, Roady 2, or XM2go Car or Home cradles. This adapter cable plugs into either the green or yellow antenna lead that are present on older, two-lead style XM Satellite Radio antennas, or into the single pink antenna connector. The other end of this adapter connects perfectly into your original Roady, Roady 2, Roady XT, Audiovox Xpress, XM2go Car or Home cradles. Also adapts the single lead pink colored antenna connector for use with the original Roady, Roady 2, XM2go Car or Home cradles. When deciding whether to use the green or yellow antenna lead from your older, two-lead style XM Satellite Radio antenna, try both, and use the one that gives you better performance. If the "antenna" message should appear on your Roady's display, use the other colored lead instead. Please note that although high quality parts are used in this products construction, some signal loss may occur at the connections causing reception in fringe areas to be adversly affected. Roady Antenna Adapter cable is approximately 6 inches long. WILL NOT allow any antenna to plug directly into the side of XM2go receivers. This antenna adapter is also compatible with all Sirius radios that feature the standard SMB antenna type connector. |
|
|
For those times when the a 50 foot extension is just too much, this 10' extension cable is compatible with any standard single lead antenna for all Sirius and XM Satellite Radio receivers. Cable has a straight male and a straight female SMB connector. Please note that this cable may possibly reduce the signal reception of the XM signal since there is no amplifier to counter the minor signal loss that the added cable length causes. It is designed to allow you to move your existing XM antenna from a marginal signal reception location to a spot that will allow your XM antenna to receive a clear signal for better signal reception. One 10' extension may be added to 50 foot extension cables. DO NOT use more than one of these 10' extension cables in any antenna extension configuration. Plug and unplug this cable only via the metal connectors. DO NOT pull on the cable itself to disconnect. 90-day parts & labor warranty from MyRadioStore.com |
|
|
For those times when the a 50 foot extension is just too much, this 15' extension cable is compatible with any standard single lead antenna for all Sirius and XM Satellite Radio receivers. Cable has a straight male and a straight female SMB connector. Please note that this cable may possibly reduce the signal reception of the XM signal since there is no amplifier to counter the minor signal loss that the added cable length causes. It is designed to allow you to move your existing XM antenna from a marginal signal reception location to a spot that will allow your XM antenna to receive a clear signal for better signal reception. One 15' extension may be added to 50 foot extension cables. DO NOT use more than one of these 15' extension cables in any antenna extension configuration. Plug and unplug this cable only via the metal connectors. DO NOT pull on the cable itself to disconnect. 90-day parts & labor warranty from MyRadioStore.com |
|
|
For those times when the a 50 foot extension is just too much, this 20' extension cable is compatible with any standard single lead antenna for all Sirius and XM Satellite Radio receivers. Please note that this cable may possibly reduce the signal reception of the XM signal since there is no amplifier to counter the minor signal loss that the added cable length causes. It is designed to allow you to move your existing XM antenna from a marginal signal reception location to a spot that will allow your XM antenna to receive a clear signal for better signal reception. One 20' extension may be added to 50 foot extension cables. DO NOT use more than one of these 20' extension cables in any antenna extension configuration. Plug and unplug this cable only via the metal connectors. DO NOT pull on the cable itself to disconnect. 90-day parts & labor warranty from MyRadioStore.com |
|
|
This 50 foot RG/6 Boxed Cable will make your antenna installation a breeze. This cable is specifically designed to work with the Terk XM6 XM home antenna for XM Satellite Radio. Will also work with any XM Radio antenna with the use of the SMB-to-F-Connector plug and jack (needs one of each). You may also need an XMAMP18 signal amplifier if cable run is over 100 feet or if signal reception is not optimal. You may install one amplifier per 100 foot run, up to two XMAMP18 amplifiers per cable run. NOT for use with XM Connect and Play Also great for mini-dish, satellite, outdoor TV antenna or cable-TV hookups. 1 x 50-Ft. 75-ohm RG-6/U Direct Burial Cable |
|
|
This 50 foot RG/6 cable will make your antenna installation a breeze. This cable is specifically designed to work with any XM Radio antenna that uses SMB type connectors. Making it directly compatible with most satellite radio receivers. This RG-6 cable is perfect for indoor / outdoor installations and its thick coating will insure that it is protected from the elements during installation and use. Please note cable may ship in the color white or black
|
|
|
This antenna extension cable is designed to work with standard satellite radio home antennas (purchased separately) to extend the cable length 100 feet. Lengths up to 300 feet can be accommodated by cascading three cable kits. Longer cable runs are possible using PS-1 Power Inserter. For home and/ or commercial use Kit includes:
|
|
|
This 100 foot RG/6 Boxed Cable will make your antenna installation a breeze. This cable is specifically designed to work with the Terk XM6 XM home antenna for XM Satellite Radio. Will also work with any XM Radio antenna with the use of the SMB-to-F-Connector plug and jack (needs one of each). You may also need an XMAMP18 signal amplifier if cable run is over 100 feet or if signal reception is not optimal. You may install one amplifier per 100 foot run, up to two XMAMP18 amplifiers per cable run. NOT for use with XM Connect and Play Also great for mini-dish, satellite, outdoor TV antenna or cable-TV hookups. 1 x 100-Ft. 75-ohm RG-6/U Direct Burial Cable |
|
|
| This 30-foot RG-58 cable features threaded SMA connectors at each end. Perfect for home installations where a heavy duty cable is needed for indoor and outdoor setups. It features sliding weather boots at each end to protect your cable and connectors from damage and harsh weather. |
|
|
For use between truck antennas that have a threaded SMA connector and satellite radio receiver car cradles with SMB antenna connections. This replacement cable is perfect for truck installations where a heavy duty cable is needed. The cable can also be used for other installations that are compatible with these antenna connectors. Compatible truck antennas: |
|
|
This 3 foot RG-6 Cable will make your antenna installation a breeze. This cable is specifically designed to work with the Terk XM6 XM home antenna for XM Satellite Radio. Will also work with any XM Radio antenna with the use of the SMB-to-F-Connector plug and jack (needs one of each). You may also need an XMAMP18 signal amplifier if cable run is over 100 feet or if signal reception is not optimal. You may install one amplifier per 100 foot run, up to two XMAMP18 amplifiers per cable run. NOT for use with XM Connect and Play Also great for mini-dish, satellite, outdoor TV antenna or cable-TV hookups. This cable features protective boots at both ends that slide over the connectors once connected. |
|
|
This 10-foot RG-6 Cable will make your antenna installation a breeze. This cable is specifically designed to work with the Terk XM6 XM home antenna for XM Satellite Radio. Will also work with any XM Radio antenna with the use of the SMB-to-F-Connector plug and jack (needs one of each). You may also need an XMAMP18 signal amplifier if cable run is over 100 feet or if signal reception is not optimal. You may install one amplifier per 100 foot run, up to two XMAMP18 amplifiers per cable run. NOT for use with XM Connect and Play Also great for mini-dish, satellite, outdoor TV antenna or cable-TV hookups. |
|